Cup Holder Installation


Installation is easy.  The hardest part is getting the tray off!  If you get stuck doing this, simply watch our video on how to remove the tray in our FAQ here.  

 

Step 1. Lift the tray up off the chair base.    
Step 2. Hang the cup holder on the chair sidewall on the left or right hand side.   

 

We recommend placing the cup holder just behind the front leg.

Line up the  cup holder with the indent on the seat for the best position and support. 
 

 



Step 3.
 Close the tray.  Ensure the tray clicks back into place securely.

We recommend checking the locking clips underneath the tray to ensure they have latched onto the seat. 

The locking clip closest to the cup holder may need to be squeezed shut with your fingers to ensure it latches as best as possible. 

 

Examples of tray locking clips with cup holders installed are shown below:


 

 


It is important to note the tray locking clips are only designed to keep the tray on the chair. 

The Kmart Prandium highchair tray is secured by only two locking clips in the middle (versus the IKEA/Target/Big W chairs which have four). If the one locking clip nearest the cup holder does not latch under the seat fully this should not impact on the tray staying securely on the seat during normal use.

WARNING: Do not lift the chair by the tray with the child seated in it. 

Plastic is pliable, and these small clips holding the tray may give way regardless of whether a cup holder is installed or not.  Move the chair by the seat "handles" under the U-shaped sides of the chair base.

 

Download our installation sheet here for future reference.

 

 
for your new cup holder.

 

Toddle Way Cup Holder has filed for Australian and International Utility Patents and any infringement will be reported to the appropriate authority.